ECONO 403

Biodegradable high density release and slip foam for hot mix and tar sealing. 

It has been specially formulated to be used as a release agent in the Hot Mix and Tar Sealing Industries, and has been developed as a replacement for hydrocarbon solvent based release agents used extensively in the Hot Mix and Tar Sealing industries. Econo 403 is biodegrable, and being non-toxic, phosphate free and pH neutral is both environmentally and user friendly.

• As a Roller Release Agent: Add 1 litre of Econo 403 to 500 litres of water. It has been found that the best method of dilution is to add Econo 403 to the Water Tank of the roller when it is half empty. Add the Econo 403 and continue filling the tank with water. Fill the tank slowly and from a bottom feed to avoid excess foaming.
• As a Release Agent for Hot Mix Tippers: To achieve optimum results it is recommended that a Dema Model 297C foamer be installed in a position before the Hot Mix fill hopper to enable ease of use by the tipper drivers. It is best to consult your local Cyndan Representative to arrange a demonstration of the Dema Foamer. The dilution rates vary between 200 parts of water to 400 parts of water to 1 litre of Econo 403 dependant on the local water quality. A Cyndan 2.7 Ltr Spray Gun may also be used as means of application for transportable hot mix plants. The dilution rates will vary dependent on local water quality.

Due to the high concentration of Active Ingredients in Econo 403, it has been found with field tests that a ‘lean’ dilution is far more effective than a ‘heavy’ dilution. As the water quality throughout Australia varies to such a great degree foam density and release ability may vary when using Econo 403. Contact your Cyndan Representative to arrange an on site demonstration to ensure you are happy with the results in your circumstances.